Saltar al contenido principal

Introducción

How to replace the Antennae power port board in the docking station of a SiriusXM Onyx Plus radio.

Partes

No se especificaron partes.

  1. Remove the two 7.6mm Torx T6 screws from the back of the docking station. Remove the two 7.6mm Torx T6 screws from the back of the docking station.
    • Remove the two 7.6mm Torx T6 screws from the back of the docking station.

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Pull the back casing off.
    • Pull the back casing off.

  4. Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.
    • Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Angel Rivera

Miembro Desde 25/01/18

505 Reputación

5 Guías creadas

Equipo

USF Tampa, Team S7-G2, Passmore Spring 2018 Miembro de USF Tampa, Team S7-G2, Passmore Spring 2018

USFT-PASSMORE-S18S7G2

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 4

Últimos 30 Días: 29

Todo El Tiempo: 279