Singer Brilliance 6180 Thread Tension Adjustment and Needle Replacement

Introducción

The Singer Brilliance 6180 is a sewing machine notable for its user-friendly features. Tension requirements vary based on fabric and machine settings, and users often run into issues regarding thread tension for this particular machine. Maintaining correct thread tension is essential to achieving high-quality stitches and when thread tension is impaired, whether too tight or too loose, this can lead to poor stitching, fabric damage, and needle breakage.

In this guide, we'll cover how to restore optimal thread tension, replace the needle, and provide preventative maintenance measures to keep your machine running smoothly and producing prime stitches!

Qué necesitas

Paso 1 Singer Brilliance 6180 Thread Tension Adjustment and Needle Replacement

Singer Brilliance 6180 Thread Tension Adjustment and Needle Replacement, Singer Brilliance 6180 Thread Tension Adjustment and Needle Replacement: paso 1, imagen 1 de 2

To adjust the tension, spin the dial located above the needle.
The default setting is 5. A higher number increases thread tension, and a lower number decreases thread tension.
WARNING: Having the tension too high may cause the needle to snap.

Traducir

Paso 2

To test the thread tension, take a scrap piece of fabric and sew a short line.
If the thread is getting bunched up leaving an incomplete line, the tension is likely too high. Proper tension will leave a straight, completed line.
Adjust thread tension as needed and retest until it is correct.

Traducir

Paso 3

To replace a needle, begin by unscrewing the screw located to the right of the needle.
Rotate the screw away from you to loosen the screw.

Traducir

Paso 4

Singer needles commonly come in small packs such as these.
There are different types of needles, but the most common needles are the 80/12 Universal Needles.
If you're sewing a heavy-weight fabric, you may choose a heavy duty needle to avoid snapping the needle.

Traducir

Paso 5

Remove the needle. Replace the needle with a fresh needle.
Rotate the screw away from you to tighten the screw.
Make sure the you hold the needle in place when tightening the screw to ensure correct needle placement.

Traducir

Paso 6

Singer Brilliance 6180 Thread Tension Adjustment and Needle Replacement: paso 6, imagen 3 de 3

Another reason the sewing machine is not sewing properly might be due to a misaligned bobbin.
To check the bobbin, remove the front section of the sewing machine by firmly sliding the section to the left.
Open the hinge door towards you to reveal the bobbin.
Check to see if the bobbin is firmly in place. If the bobbin is loose, shift the bobbin to fit firmly in place.