Saltar al contenido principal

Introducción

This guide will separate the power unit assembly from the vacuum.

Partes

No se especificaron partes.

  1. Separate the power unit assembly (the black top) from the tank assembly (the red bottom).
    • Separate the power unit assembly (the black top) from the tank assembly (the red bottom).

    • To open, grab the black clips on both sides of the vacuum. Pull away from device and lift up black top.

  2. Turn over the black top and locate the 3 screws to remove the filter section.
    • Turn over the black top and locate the 3 screws to remove the filter section.

    • Remove the 3 H3.5 Allen screws on the black top.

  3. Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora

    Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora
  4. Separate top filter section from the power unit assembly.
    • Separate top filter section from the power unit assembly.

    • Remove the four H3.5 Allen screws.

  5. After removing the screws, separate the power unit assembly from the cover.
    • After removing the screws, separate the power unit assembly from the cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ngunlian

Miembro Desde 08/02/16

555 Reputación

5 Guías creadas

Equipo

IUPUI, Team 1-2, Baechle Spring 2016 Miembro de IUPUI, Team 1-2, Baechle Spring 2016

IUPUI-BAECHLE-S16S1G2

5 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 5

Todo El Tiempo: 241