Partes

No se requieren partes.

Place the TV face down on a flat smooth surface as to not scratch the screen. Remove the four 8mm screws attaching the stand to the TV.
  • Place the TV face down on a flat smooth surface as to not scratch the screen.

  • Remove the four 8mm screws attaching the stand to the TV.

Agregar Comentario

Lift the stand off the television. Lift the stand off the television.
  • Lift the stand off the television.

Agregar Comentario

Remove the two back panels to display the audio and video inputs.. Remove the two back panels to display the audio and video inputs.. Remove the two back panels to display the audio and video inputs..
  • Remove the two back panels to display the audio and video inputs..

Agregar Comentario

Remove the eight 6mm Phillips screws around the edge. Remove the two 6mm Phillips near the inputs.
  • Remove the eight 6mm Phillips screws around the edge.

  • Remove the two 6mm Phillips near the inputs.

Agregar Comentario

Lift and remove the back case of the television.
  • Lift and remove the back case of the television.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Robert Hobson

Miembro Desde 20/01/11

1,275 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 1-11, Amido Winter 2011 Miembro de Cal Poly, Team 1-11, Amido Winter 2011

CPSU-AMIDO-W11S1G11

4 Miembros

9 Guías creadas

How do you remove the casing of a sharp LC26SB25E ? Please.

alan - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 15

Todo El Tiempo: 2,758