Saltar al contenido principal

Sharp Aquos Crystal Screen Replacement

Qué necesitas

  1. Sharp Aquos Crystal Screen Replacement, Back Panel: paso 1, imagen 1 de 3 Sharp Aquos Crystal Screen Replacement, Back Panel: paso 1, imagen 2 de 3 Sharp Aquos Crystal Screen Replacement, Back Panel: paso 1, imagen 3 de 3
    • Peel back the back cover of the phone from the access point to remove it. It should come off easily using your hands.

    Sense4liteなんですけど全く取れないです

    kpt - Contestar

    Helo my back camera problem please Oder my camera

    Umar Umar - Contestar

  2. Sharp Aquos Crystal Screen Replacement, USB Port: paso 2, imagen 1 de 2 Sharp Aquos Crystal Screen Replacement, USB Port: paso 2, imagen 2 de 2
    • Remove seven 3mm Star #5 screws shown in the picture with a screwdriver.

    • Remove two 3.5mm Star #5 screws shown in the picture with a screwdriver.

    • Remove two 5mm Star #5 screws shown in the picture with a screwdriver.

  3. Sharp Aquos Crystal Screen Replacement: paso 3, imagen 1 de 2 Sharp Aquos Crystal Screen Replacement: paso 3, imagen 2 de 2
    • Pry open the back panel using a plastic opening tool. Do this around the edges until you are able to lift it off.

  4. Sharp Aquos Crystal Screen Replacement: paso 4, imagen 1 de 2 Sharp Aquos Crystal Screen Replacement: paso 4, imagen 2 de 2
    • Disconnect the wire by lifting it up with a plastic opening tool.

    what does the wire go to

    Aven Myers - Contestar

  5. Sharp Aquos Crystal Screen Replacement: paso 5, imagen 1 de 3 Sharp Aquos Crystal Screen Replacement: paso 5, imagen 2 de 3 Sharp Aquos Crystal Screen Replacement: paso 5, imagen 3 de 3
    • To disconnect the cable, use the tip of a spudger or your fingernail to flip up the small retaining flap. Then, you can safely pull the ribbon cable out.

  6. Sharp Aquos Crystal Screen Replacement: paso 6, imagen 1 de 1
    • After removing the wires, carefully snap out the usb port with your hands. It is held down by some plastic clips, so some force may be needed.

    Hello

    I would like to buy a Sharp c10 Aquos Crystal USB Port

    Can you help me with that ???

    ابو مصطفى - Contestar

    I need this part (aquos r2) I'm from Pakistan

    Faisal Abbas - Contestar

  7. Sharp Aquos Crystal Screen Replacement, Motherboard: paso 7, imagen 1 de 1
    • Peel off the black pieces of tape.

  8. Sharp Aquos Crystal Screen Replacement: paso 8, imagen 1 de 1
    • Use the tip of a spudger or your fingernail to flip up the small retaining flap. Then pull the cable out using tweezers.

  9. Sharp Aquos Crystal Screen Replacement: paso 9, imagen 1 de 2 Sharp Aquos Crystal Screen Replacement: paso 9, imagen 2 de 2
    • Remove the wire from the two marked connections using tweezers to pull the wire apart from the device.

  10. Sharp Aquos Crystal Screen Replacement: paso 10, imagen 1 de 1
    • Peel the tape off with your hands.

  11. Sharp Aquos Crystal Screen Replacement: paso 11, imagen 1 de 1
    • Lift the motherboard out with your hands.

  12. Sharp Aquos Crystal Screen Replacement, Battery: paso 12, imagen 1 de 1
    • Peel off the tape holding the battery down.

  13. Sharp Aquos Crystal Screen Replacement: paso 13, imagen 1 de 2 Sharp Aquos Crystal Screen Replacement: paso 13, imagen 2 de 2
    • Lift the battery out with your hands.

  14. Sharp Aquos Crystal Screen Replacement, Screen: paso 14, imagen 1 de 1
    • Replace this component with the new one.

    Aqous r3 screen replacement hai

    Abid Zaman - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Felicia Imbriano

Miembro Desde 03/08/16

1,169 Reputación

8 Guías creadas

Equipo

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 21

Ultimos 30 días: 64

Todo El Tiempo: 8,873