Repara tus cosas Comunidad Tienda

Shark Ultimate Professional Circuit Board Replacement

Introducción

Before beginning this guide, ensure that the device is both unplugged and cool; failure to do so may result in electrocution or burns.

Qué necesitas

  1. Shark Ultimate Professional Circuit Board Replacement, Circuit Board: paso 1, imagen 1 de 3 Shark Ultimate Professional Circuit Board Replacement, Circuit Board: paso 1, imagen 2 de 3 Shark Ultimate Professional Circuit Board Replacement, Circuit Board: paso 1, imagen 3 de 3

    • Use the Philips head #0 screwdriver to remove the two 11.49mm screws at the back of the iron.

    • Remove the back cover piece.

    • Make sure the iron is unplugged and cooled off.

    Traducir

  2. Shark Ultimate Professional Circuit Board Replacement: paso 2, imagen 1 de 2 Shark Ultimate Professional Circuit Board Replacement: paso 2, imagen 2 de 2

    • Use the Philips head #0 screwdriver to remove the two 11.77mm screws holding the white clamp to the iron.

    • Use the Philips head #0 screwdriver to remove the two 6.58mm screws holding the black wires to the body of the iron.

    • Removing the left black wire will also free the red wire, attached by the same screw.

    Traducir

  3. Shark Ultimate Professional Circuit Board Replacement: paso 3, imagen 1 de 1

    • Pull the split end of the power cord upward through the ball joint.

    • Set aside the power cord.

    Traducir

  5. Shark Ultimate Professional Circuit Board Replacement: paso 4, imagen 1 de 3 Shark Ultimate Professional Circuit Board Replacement: paso 4, imagen 2 de 3 Shark Ultimate Professional Circuit Board Replacement: paso 4, imagen 3 de 3

    • Use the Philips head #0 screwdriver to remove the remaining 6.58mm screws that hold the wires on the bottom (brown and blue).

    • Remove from left to right

    • Unclip the black adapter piece on the bottom right.

    • Wires order (from left to right): Brown, Blue, Red, Black

    Traducir

  6. Shark Ultimate Professional Circuit Board Replacement: paso 5, imagen 1 de 2 Shark Ultimate Professional Circuit Board Replacement: paso 5, imagen 2 de 2

    • Use the Philips head #0 screwdriver to remove the two 9.75mm screws (left and right) affixed to the circuit board.

    Traducir

  7. Shark Ultimate Professional Circuit Board Replacement: paso 6, imagen 1 de 2 Shark Ultimate Professional Circuit Board Replacement: paso 6, imagen 2 de 2

    • Use the Philips head #0 screwdriver to remove the two 9.82mm screws (left and right) from the white border on top of the circuit board.

    • Gently pull the circuit board from affixed position.

    • The circuit board will not be completely separated at this point.

    Traducir

  8. Shark Ultimate Professional Circuit Board Replacement: paso 7, imagen 1 de 3 Shark Ultimate Professional Circuit Board Replacement: paso 7, imagen 2 de 3 Shark Ultimate Professional Circuit Board Replacement: paso 7, imagen 3 de 3

    • Remove the mode display piece and set aside.

    • Lift the handle and wiggle the plastic trim and the orange-chrome bezel out from under the handle.

    Traducir

  9. Shark Ultimate Professional Circuit Board Replacement: paso 8, imagen 1 de 1

    • Remove the connecting wire from the connected adapter in the handle by pulling lightly.

    • Set aside the circuit board.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Drew Carff

Miembro Desde 10/23/17

868 Reputación

5 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team S1-G4, Leahy Fall 2017 Miembro de USF Tampa, Team S1-G4, Leahy Fall 2017

USFT-LEAHY-F17S1G4

3 Miembros

10 Guías creadas

4 comentarios

My shark 1505C does not have philips screws on the back. They are security torx and I cannot find a tool to open it.

Where can I buy a main board for this iron ?

Thanks

NevG.

nevstarg - Contestar

where do I buy it's circuit board?

egovieira - Contestar

Where can u buy the circuit board professional 1800 version?

Astinder Singhera - Contestar

How much does the circuit board cost? and where can i purchase it?

D.A. Willis - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 32

Todo El Tiempo: 3,073