Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Push the lift away button and pull the handle up to separate the body from the wand section.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Push lift away button on the wand then lift up on the top section to separate.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lay the head nozzle piece upside down.
-
Rotate the three gray taps to the unlock position.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With your fingers, pry and pull the brush cage open.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 13 screws (circled in yellow) using a phillips screwdriver.
-
Remove the one screw (circled in red) that has a Torx head (might be Phillips head on some models).
-
Remove the horizontal screw (circled in orange) that attaches the gray side panel (necessary to remove the white cap on the roller brush in step 8)
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift up the top cover now that all of the screws have been removed.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove white cap with a Flathead screwdriver or any other wedge-like tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently push piece in.
-
Pull piece down and out of the container.
-
Cancelar: No complete esta guía.
12 personas más completaron esta guía.
19 comentarios
Same. Need a new brush bar.
I appreciate the info you had posted. It was easy to follow and helped me to save money on buying a new vacuum!
I have the same question. Where can I find the brushbar to the Shark Rotator Professional lift-away mv650?
i’m getting a little frustrated because my carpet’s pile is not getting lifted and cleaned.
Venette
7 August 2019
Does anyone get a reply?