Saltar al contenido principal

Shark Professional Steam Pocket Mop Head Replacement

  1. Shark Professional Steam Pocket Mop Head Replacement, Mop Head: paso 1, imagen 1 de 2 Shark Professional Steam Pocket Mop Head Replacement, Mop Head: paso 1, imagen 2 de 2
    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

  2. Shark Professional Steam Pocket Mop Head Replacement: paso 2, imagen 1 de 3 Shark Professional Steam Pocket Mop Head Replacement: paso 2, imagen 2 de 3 Shark Professional Steam Pocket Mop Head Replacement: paso 2, imagen 3 de 3
    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tyler Wicke

Miembro Desde 10/17/18

237 Reputación

2 Guías creadas

Equipo

UW Tacoma, Team S1-G3, Rose Fall 2018 Miembro de UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 10

Ultimos 30 días: 37

Todo El Tiempo: 1,814