Saltar al contenido principal

Introducción

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

  1. Turn off the Steam Pocket Mop and unplug it from the wall. Be sure that any water in the water tank cools before proceeding.
    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

  2. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  3. Push down on the round, grey release button near the connection point, while pulling the mop head out. The mop head should slide out and detach. When reassembling, you should hear it click into place if it is properly installed.
    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tyler Wicke

Miembro Desde 17/10/18

219 Reputación

2 Guías creadas

Equipo

UW Tacoma, Team S1-G3, Rose Fall 2018 Miembro de UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 4

Todo El Tiempo: 92