Saltar al contenido principal

Shark Navigator Lightweight Upright Dust Cup Replacement

  1. Shark Navigator Lightweight Upright Dust Cup Replacement, Dust Cup: paso 1, imagen 1 de 2 Shark Navigator Lightweight Upright Dust Cup Replacement, Dust Cup: paso 1, imagen 2 de 2
    • Press down on the black, rubber ballish button located on the top of the vacuum.

    • Pull back simultaneous on the plastic handle and remove the dust container.

  2. Shark Navigator Lightweight Upright Dust Cup Replacement: paso 2, imagen 1 de 3 Shark Navigator Lightweight Upright Dust Cup Replacement: paso 2, imagen 2 de 3 Shark Navigator Lightweight Upright Dust Cup Replacement: paso 2, imagen 3 de 3
    • Press the plastic tab in, located on the front of the dust container.

    • Pull up simultaneously on the plastic handle.

  3. Shark Navigator Lightweight Upright Dust Cup Replacement: paso 3, imagen 1 de 2 Shark Navigator Lightweight Upright Dust Cup Replacement: paso 3, imagen 2 de 2
    • Remove the dust cup from the inside of the dust container.

  4. Shark Navigator Lightweight Upright Dust Cup Replacement: paso 4, imagen 1 de 3 Shark Navigator Lightweight Upright Dust Cup Replacement: paso 4, imagen 2 de 3 Shark Navigator Lightweight Upright Dust Cup Replacement: paso 4, imagen 3 de 3
    • Push in the red tab located on the side of the dust cup.

    • Open the dust cup simultaneously with the cone-half pointing downwards.

    • Separate the two halves.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kahye Yu

Miembro Desde 10/02/17

446 Reputación

2 Guías creadas

Equipo

Cal Poly, Team S4-G6, Livingston Fall 2017 Miembro de Cal Poly, Team S4-G6, Livingston Fall 2017

CPSU-LIVINGSTON-F17S4G6

3 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 24

Ultimos 30 días: 89

Todo El Tiempo: 3,243