Saltar al contenido principal

Shark Navigator Freestyle SV1106 Roller Brush Replacement

Qué necesitas

  1. Shark Navigator Freestyle SV1106 Roller Brush Replacement, Roller Brush: paso 1, imagen 1 de 2 Shark Navigator Freestyle SV1106 Roller Brush Replacement, Roller Brush: paso 1, imagen 2 de 2
    • Remove the black rubber band from the roller brush

    • In most models there will be a plastic cover over the rubber band. You will use the quarter to twist the latch and take off the cover

  2. Shark Navigator Freestyle SV1106 Roller Brush Replacement: paso 2, imagen 1 de 3 Shark Navigator Freestyle SV1106 Roller Brush Replacement: paso 2, imagen 2 de 3 Shark Navigator Freestyle SV1106 Roller Brush Replacement: paso 2, imagen 3 de 3
    • Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.

  3. Shark Navigator Freestyle SV1106 Roller Brush Replacement: paso 3, imagen 1 de 3 Shark Navigator Freestyle SV1106 Roller Brush Replacement: paso 3, imagen 2 de 3 Shark Navigator Freestyle SV1106 Roller Brush Replacement: paso 3, imagen 3 de 3
    • Slide the roller belt off of the roller brush and pull the roller away from the motorized brush.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Zachary Liu

Miembro Desde 01/24/18

604 Reputación

5 Guías creadas

Equipo

Cal Poly, Team S1-G5, Livingston Winter 2018 Miembro de Cal Poly, Team S1-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G5

3 Miembros

10 Guías creadas

3 comentarios

but where can I buy the brush for model SV1106?

ellenmccarthycalif - Contestar

Replace the brush? They are not available for purchase.

Ken Codeglia - Contestar

If only you could buy a brush besides second hand on eBay…

isaac.a.brown - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 10

Todo El Tiempo: 2,956