Repara tus cosas Comunidad Tienda

Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement

Introducción

If you need to replace or re-install the accessory hose attachment for your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed to complete this replacement.

  1. Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement, Accessory Hose Attachment: paso 1, imagen 1 de 2 Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement, Accessory Hose Attachment: paso 1, imagen 2 de 2

    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

    Editar

  3. Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement: paso 2, imagen 1 de 2 Shark Lift-Away Professional Steam Pocket Mop Accessory Hose Attachment Replacement: paso 2, imagen 2 de 2

    • Disconnect the hand-held steamer unit from the accessory extension hose.

    • Grip the hand-held steamer and push down on the two release buttons.

    • Gently pull the accessory extension hose out in a horizontal motion until it disconnects.

    • When reassembling, be sure to insert the base of the hand-held unit first.

    • If you have any problems with the hand-held steamer locking into place, please consult our Troubleshooting Page.

    • While the accessory extension hose is not pictured here, the procedure is the same.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Rachel Howe

Miembro Desde 10/17/18

261 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

UW Tacoma, Team S1-G3, Rose Fall 2018 Miembro de UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Miembros

10 Guías creadas

2 comentarios

What if it won't allow to power on once reassembled? The light flashes but won't click on.

Aubrey Diaz - Contestar

really?? take it on and off with more words.... how about something helpful like where this stupid little rubber band goes so that the trigger is actuated when the unit is placed in the floor mopper. pat yourself on the back you rewrote the basic user instructions and called it a repair. thanks for the complete waste of my time

Jessica Mcallister - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 38

Todo El Tiempo: 2,535