Saltar al contenido principal

Introducción

If you need to replace or re-install the accessory hose attachment for your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed to complete this replacement.

  1. Turn off the Steam Pocket Mop and unplug it from the wall. Be sure that any water in the water tank cools before proceeding.
    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

  2. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  3. Disconnect the hand-held steamer unit from the main unit. Grip the hand-held steamer and push down on the two release buttons.
    • Disconnect the hand-held steamer unit from the main unit.

    • Grip the hand-held steamer and push down on the two release buttons.

    • Gently pull the unit out in a horizontal motion until it disconnects.

    • When reassembling, be sure to insert the base of the hand-held unit first.

    • If you have any problems with the hand-held steamer locking into place, please consult our Troubleshooting Page.

    • We did not have the accessory hose, which is why it is not pictured.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Rachel Howe

Miembro Desde 17/10/18

219 Reputación

2 Guías creadas

Equipo

UW Tacoma, Team S1-G3, Rose Fall 2018 Miembro de UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 11

Todo El Tiempo: 145