Saltar al contenido principal

Introducción

NOTE: This part of the replacement guide does not require tools.

This part of the replacement guide focuses on the replacement of the soft brush roll, which is the brush roll which is more prone to wearing out. The soft brush roll was designed to be easily replaced by the user.

  1. Press and slide the access brush roll buttons towards the "Access Brush Roll" printing on casing.
    • Press and slide the access brush roll buttons towards the "Access Brush Roll" printing on casing.

  2. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  3. Lift  plastic casing upward and off of the top of the floor unit.  Place off to the side.
    • Lift plastic casing upward and off of the top of the floor unit. Place off to the side.

  4. Pull the red Pull tab that is located on the right side of the soft brush roll away from the front of the vacuum and place the soft brush roll to the side.
    • Pull the red Pull tab that is located on the right side of the soft brush roll away from the front of the vacuum and place the soft brush roll to the side.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 7

Últimos 30 Días: 39

Todo El Tiempo: 223