Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Soldering skills are required.
Qué necesitas
-
-
Open the garage door by sliding both of the release buttons away from you.
-
Lift off the garage door.
-
-
-
Remove the plastic screw covering using a metal spudger by pushing the sharp side into the crevice and prying the cover out.
-
-
-
-
Remove one 15mm T10 screw from the inside left of the base of the vacuum to access the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.