Introducción
If your vacuum is leaving behind debris or has loss of suction, use this guide to replace the brushrolls. You will not need any tools to replace the brushrolls.
-
-
Press the two Brush Roll Access buttons down at the same time to detach the cover.
-
Pull the cover off of the vacuum by lifting it up.
-
-
-
-
Pull up on the Pull Tab to remove the large brush roll.
-
-
-
Press the Eject Roller button to detach the small roller.
-
Pull the roller away from the vacuum to remove it.
I can’t find any pull tab to pull out big rollet
Hola nesecito comprar toda esta parte
hello… no tab to pull, this is not right, my belt broke and cant figure it out.. how do i change belt?
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Equipo
Cal Poly, Team S17-G4, White Fall 2018 Miembro de Cal Poly, Team S17-G4, White Fall 2018
CPSU-WHITE-F18S17G4
Miembros de 4
16 Guías creadas
Un comentario
I need help with removing the beater bar on the nv835 I can't find help nowhere
Where can I buy belt drive replacement assembly,,
Mike Abdoo - Contestar