Repara tus cosas Comunidad Tienda

Shark Cordless Pet Perfect Front Motor Replacement

Introducción

If you are having a problem with your device's Front motor, Here is a Step by step guide to replace a faulty or broken Front motor.

Qué necesitas

  1. Shark Cordless Pet Perfect Front Motor Replacement, Front Belt: paso 1, imagen 1 de 2 Shark Cordless Pet Perfect Front Motor Replacement, Front Belt: paso 1, imagen 2 de 2

    • Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit.

    Editar

  2. Shark Cordless Pet Perfect Front Motor Replacement: paso 2, imagen 1 de 3 Shark Cordless Pet Perfect Front Motor Replacement: paso 2, imagen 2 de 3 Shark Cordless Pet Perfect Front Motor Replacement: paso 2, imagen 3 de 3

    • Once the screws are removed pull the front face plate off. This will allow access to the belt and motor.

    Editar

  4. Shark Cordless Pet Perfect Front Motor Replacement: paso 3, imagen 1 de 3 Shark Cordless Pet Perfect Front Motor Replacement: paso 3, imagen 2 de 3 Shark Cordless Pet Perfect Front Motor Replacement: paso 3, imagen 3 de 3

    • Lift the brush roller upwards towards you, and the brush roller should come out along with the belt.

    Editar

  5. Shark Cordless Pet Perfect Front Motor Replacement: paso 4, imagen 1 de 2 Shark Cordless Pet Perfect Front Motor Replacement: paso 4, imagen 2 de 2

    • Remove the belt from the motor mount, and then replace with a new belt.

    Editar

  6. Shark Cordless Pet Perfect Front Motor Replacement, Front Motor: paso 5, imagen 1 de 2 Shark Cordless Pet Perfect Front Motor Replacement, Front Motor: paso 5, imagen 2 de 2

    • Remove the solder from both motor terminals.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Ashley Calkins

Miembro Desde 02/02/17

560 Reputación

3 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team 16-2, Blackwell Spring 2017 Miembro de USF Tampa, Team 16-2, Blackwell Spring 2017

USFT-BLACKWELL-S17S16G2

4 Miembros

11 Guías creadas

2 comentarios

Well done, Ashley! You might want to note that using a solder remover is helpful.

Jimbo - Contestar

Where can I obtain the new motor with the plastic gear?

F V - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 17

Todo El Tiempo: 2,633