Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 3 : paso 1, imagen 2 de 3 : paso 1, imagen 3 de 3
    • Before beginning the guide make sure the scooter is off and placed on a stand or table for easier access to work on.

    • Remove the cap and reflection tag using a slotted screwdriver.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 3 : paso 2, imagen 2 de 3 : paso 2, imagen 3 de 3
    • Use 3 mm Allen key to loosen three hexagon screws from each side of the wheel.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 2 : paso 3, imagen 2 de 2
    • Snap the covers away from the scooter from both sides.

    • Remove the covers slowly and steadily to avoid breaking it.

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 2 : paso 4, imagen 2 de 2
    • To detach the brake, use a 10 mm Allen wrench to remove the bolt from the tire that is attached with the brake.

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 2 : paso 5, imagen 2 de 2
    • Use a 15 mm socket wrench to remove 15mm bolt from the tire of the scooter on both sides of the front wheel.

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 1
    • Pull down the tire and remove it from the frame.

Linea de Meta

3 personas más completaron esta guía.

Shafran Jamal

Miembro Desde 05/10/21

213 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 46

Ultimos 30 días: 181

Todo El Tiempo: 9,930