Repara tus cosas Comunidad Tienda

Sega Master System Model 2 Disassembly

Introducción

In this guide we dissassemble the Sega Master System II

Qué necesitas

Resumen del Video

  1. Sega Master System Model 2 Disassembly, The Case: paso 1, imagen 1 de 1

    • Take out the 5 screws at the bottom

    Editar

  2. Sega Master System Model 2 Disassembly, RF Shield: paso 2, imagen 1 de 1

    • Remove the 5 screws (3 at the back and 2 on the front)

    • Remove the screw at the side (this screws is different then the other 5 so remember to put them away from the other 5 screws since they are similar)

    • This screw is for the rf shield under for the voltage regulator under this bigger rf shield, its not needed to remove that screw

    Editar

  4. Sega Master System Model 2 Disassembly, Cartridge Slot: paso 3, imagen 1 de 1

    • Remove the 2 screws thats holding the cartridge slot down

    Editar

  5. Sega Master System Model 2 Disassembly, The End: paso 4, imagen 1 de 1

    • Congratulations! You have opened your Sega Master System Model 2!

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Screenshots taken from a video by Global Garage

3 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Krisow

Miembro Desde 10/18/17

605 Reputación

2 Guías creadas

Insignias: 12

+ 9 más insignias

3 comentarios

This is in the wrong section.

Owen Ready - Contestar

Nope, its in the Sega Master System area.

Krisow -

Not a Master System

Chad Luciano - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 41

Todo El Tiempo: 2,329