Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

In this guide we dissassemble the Sega Master System II

Partes

No se especificaron partes.

Resumen del Video

  1. Take out the 5 screws at the bottom
    • Take out the 5 screws at the bottom

  2. Remove the 5 screws (3 at the back and 2 on the front)
    • Remove the 5 screws (3 at the back and 2 on the front)

    • Remove the screw at the side (this screws is different then the other 5 so remember to put them away from the other 5 screws since they are similar)

    • This screw is for the rf shield under for the voltage regulator under this bigger rf shield, its not needed to remove that screw

  3. El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

    El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora
  4. Remove the 2 screws thats holding the cartridge slot down
    • Remove the 2 screws thats holding the cartridge slot down

  5. Congratulations! You have opened your Sega Master System Model 2!
    • Congratulations! You have opened your Sega Master System Model 2!

Conclusión

To reassemble your device, follow these instructions in reverse order.

Screenshots taken from a video by Global Garage

Una persona más ha completado esta guía.

Krisow

Miembro Desde 18/10/17

484 Reputación

2 Guías creadas

This is in the wrong section.

Owen Ready - Contestar

Nope, its in the Sega Master System area.

Krisow -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 4

Ultimos 30 días: 27

Todo El Tiempo: 775