Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Power down the phone by holding down the red "end" button.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Push and hold the button on the back toward the direction of the arrow to unlock the battery.
-
Lift and remove the battery from the back of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a push pin or tweezers to remove the neoprene screw-cover located on the upper, left corner of the back casing.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry the back casing off the device using a spudger. Work your way along the edges to completely separate the back casing from the device.
-
Remove the headphone jack cover when separating the back casing. The headphone jack is located on the opposite side of the antenna.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently lift up the motherboard. The keypad should now be exposed.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using tweezers, pull on the silver flex ribbon to disconnect it from the motherboard.
-