Saltar al contenido principal

Sanyo VPC-T850 LCD Display Replacement

Guía Archivada
Esta guía se mantiene únicamente para fines históricos. Utiliza la última versión de la guía para llevar a cabo tu reparación.

Qué necesitas

  1. Sanyo VPC-T850 LCD Display Replacement, Disconnect the Ribbon: paso 1, imagen 1 de 2 Sanyo VPC-T850 LCD Display Replacement, Disconnect the Ribbon: paso 1, imagen 2 de 2
    • Use caution not to damage ribbon when disconnecting.

    • The yellow ribbon is attached to the right side of the screen and goes to a black connector piece.

    • Gently flip the black connector away from the LCD screen to unlock the yellow ribbon.

    • Carefully pull the yellow ribbon towards the LCD screen to disconnect it.

  2. Sanyo VPC-T850 LCD Display Replacement, Remove LCD Screen: paso 2, imagen 1 de 1
    • The LCD screen should now be disconnected from the rest of the camera and a pry tool can be used to lift it out of its casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jonathan Yau

Miembro Desde 04/11/10

26 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 27-95, Amido Spring 2010 Miembro de Cal Poly, Team 27-95, Amido Spring 2010

CPSU-AMIDO-S10S27G95

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 3,513