Introducción

Follow this guide to replace a faulty headphone jack in your Sandisk Sansa m230 Series MP3 Player.

  1. Remove the battery compartment cover.
    • Remove the battery compartment cover.

    • Remove the battery.

    Agregar Comentario

  2. Locate and remove the screw next to the battery compartment lid.
    • Locate and remove the screw next to the battery compartment lid.

    Agregar Comentario

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    Agregar Comentario

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    Agregar Comentario

    • You now have access to all components found on the inside of the device!

    Agregar Comentario

    • Locate the headphone jack on the motherboard.

    Agregar Comentario

    • Ensure the hot end of the soldering iron is elevated on a metal stand when not in use to prevent burns.

    • The solder and soldering iron are very hot! Do not touch unless you are wearing appropriate protective gloves.

    Agregar Comentario

    • Use soldering iron to melt the existing solder at the three headphone jack connections.

    Agregar Comentario

    • Remove the faulty headphone jack from the motherboard.

    Agregar Comentario

    • Align the new headphone jack appropriately on the motherboard for soldering.

    Agregar Comentario

    • Use the soldering iron and solder to create three stable connections between the motherboard and the headphone jack.

    • Allow the new solder to cool and harden before reassembling the MP3 player.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

James Thorne

Miembro Desde 05/11/13

625 Reputación

6 Guías creadas

Equipo

UMass Dartmouth, Team 1-8, Shastany Fall 2013 Miembro de UMass Dartmouth, Team 1-8, Shastany Fall 2013

UMASSD-SHASTANY-F13S1G8

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 27

Todo El Tiempo: 847