Repara tus cosas Comunidad Tienda

Samsung WB2100 Back Cover Assembly Replacement

Introducción

This is a prerequisite guide to take off the back cover assembly.

Qué necesitas

  1. Samsung WB2100 Back Cover Assembly Replacement, Back Cover Assembly: paso 1, imagen 1 de 3 Samsung WB2100 Back Cover Assembly Replacement, Back Cover Assembly: paso 1, imagen 2 de 3 Samsung WB2100 Back Cover Assembly Replacement, Back Cover Assembly: paso 1, imagen 3 de 3

    • Remove the 7 screws on the outside of the camera

    • Two 5 mm PH000 screws on the right side of the camera body

    • Four 3mm PH000 screws on the bottom and the left side of the camera body.

    • Use the plastic spundger to push the back casing out. Start from the right side and work your way clockwise around the case.

    • The HDMI / AV tab might fall out. this is supposed to happen as it is not screwed into place in the back casing.

    Editar

  3. Samsung WB2100 Back Cover Assembly Replacement: paso 2, imagen 1 de 2 Samsung WB2100 Back Cover Assembly Replacement: paso 2, imagen 2 de 2

    • Disconnect the set of wires from the back casing to the motherboard. Do this by using the plastic spundger to flip the black tab up and the wires will pull out.

    • Unscrew the four 3 mm and two silver 1 mm PH000 screw from the green logic board

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Mason Ricks

Miembro Desde 01/20/16

282 Reputación

2 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

USF Tampa, Team 15-3, Remmell Spring 2016 Miembro de USF Tampa, Team 15-3, Remmell Spring 2016

USFT-REMMELL-S16S15G3

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 330