Saltar al contenido principal

Introducción

This guide provides instructions on how to replace the flash component of the Samsung WB1100F.

  1. Samsung WB1100F Camera Flash Replacement, LCD Screen Cover: paso 1, imagen 1 de 2 Samsung WB1100F Camera Flash Replacement, LCD Screen Cover: paso 1, imagen 2 de 2
    • Remove six 1.2 mm Phillips #00 screws connected to the tripod dock and adjacent screws.

    • Remove six 1.2 mm Phillips #00 screws from the side of the camera.

  2. Samsung WB1100F Camera Flash Replacement: paso 2, imagen 1 de 2 Samsung WB1100F Camera Flash Replacement: paso 2, imagen 2 de 2
    • Use a plastic opening tool or spudger if available.

    • Using the flat end of a spudger, loosen the connection between the back panel and the device. Remove the back panel using your hands.

  3. Samsung WB1100F Camera Flash Replacement, Camera Flash: paso 3, imagen 1 de 3 Samsung WB1100F Camera Flash Replacement, Camera Flash: paso 3, imagen 2 de 3 Samsung WB1100F Camera Flash Replacement, Camera Flash: paso 3, imagen 3 de 3
    • Remove four 1.2 mm Phillips #00 screws from the top panel.

  4. Samsung WB1100F Camera Flash Replacement: paso 4, imagen 1 de 1
    • Using the flat end of a spudger, loosen the connection between the top panel and the device. Remove the top panel using your hands.

  5. Samsung WB1100F Camera Flash Replacement: paso 5, imagen 1 de 1
    • Remove four 1.2 mm Phillips #00 screws from the flash assembly

  6. Samsung WB1100F Camera Flash Replacement: paso 6, imagen 1 de 1
    • Using your hands, remove the flash assembly. This should not require much force.

  7. Samsung WB1100F Camera Flash Replacement: paso 7, imagen 1 de 2 Samsung WB1100F Camera Flash Replacement: paso 7, imagen 2 de 2
    • Using your hands, remove the top flash panel by pressuring down on the back to release a locking tab.

  8. Samsung WB1100F Camera Flash Replacement: paso 8, imagen 1 de 1
    • Desolder three wires on the flash assembly.

  9. Samsung WB1100F Camera Flash Replacement: paso 9, imagen 1 de 1
    • Gently remove the flash assembly from the body.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jesse Lindsey

Miembro Desde 13/05/16

581 Reputación

5 Guías creadas

Equipo

Metro State, Team 1-1, Carpenter SU 2016 Miembro de Metro State, Team 1-1, Carpenter SU 2016

MSU-CARPENTER-SU16S1G1

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 8

Todo El Tiempo: 463