Repara tus cosas Comunidad Tienda

Samsung U28E510 Jog Button Replacement

Introducción

This guide will assist users to replace a damaged or nonoperational jog button.

Qué necesitas

  1. Samsung U28E510 Jog Button Replacement, Jog Button: paso 1, imagen 1 de 3 Samsung U28E510 Jog Button Replacement, Jog Button: paso 1, imagen 2 de 3 Samsung U28E510 Jog Button Replacement, Jog Button: paso 1, imagen 3 de 3

    • Start by removing the screen bezel.

    • Use a pair of spudgers to pry between the bezel and the rest of the monitor.

    • Ideally use plastic tools as this step could damage the edges of the screencover.

    • lay monitor on its back and pull off screen cover.

    Editar

  3. Samsung U28E510 Jog Button Replacement: paso 2, imagen 1 de 2 Samsung U28E510 Jog Button Replacement: paso 2, imagen 2 de 2

    • Flip the monitor over so that it is facedown.

    • remove the single screw in the middle using a #2 Phillips screwdriver.

    • Remove the backing to reveal the Jog Button.

    Editar

  4. Samsung U28E510 Jog Button Replacement: paso 3, imagen 1 de 1

    • Disconnect signal cable to power supply board.

    • Remove and replace jog button.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order. Ensure the bezel completely snaps in place all around monitor.

3 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Jake Ritter

Miembro Desde 01/22/18

106 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

Cal Poly, Team S11-G1, Banghart Winter 2018 Miembro de Cal Poly, Team S11-G1, Banghart Winter 2018

CPSU-BANGHART-W18S11G1

4 Miembros

6 Guías creadas

5 comentarios

i have a samsung u28d590d and it works just the same. simple and easy as the guide says.

joshsc2 - Contestar

Does anyone have the part number or where I can buy the new jog button?

Kyle Gulliford - Contestar

“bn96-32135b “

Gary Deon -

this is the part number i found BN96-32135B

Gary Deon - Contestar

the button on my monitor wasn't working anymore - pressing it didn't do anything. So I decided to follow this great guide. When I removed the top of the button and put it on again, I noticed that it worked again. Seems that there had been just to many dust.

Thanx for this guide!

Ralf D. Müller - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 23

Ultimos 30 días: 95

Todo El Tiempo: 6,482