Repara tus cosas Comunidad Tienda

Samsung SGH-X495 Microphone Replacement

Qué necesitas

  1. Samsung SGH-X495 Microphone Replacement, Backplate: paso 1, imagen 1 de 1

    • Remove the 4 (4.7mm) philips head screws.

    Editar

  2. Samsung SGH-X495 Microphone Replacement: paso 2, imagen 1 de 1

    • Unplug the rubber charger outlet cover.

    Editar

  3. Samsung SGH-X495 Microphone Replacement: paso 3, imagen 1 de 1

    • Unplug the rubber headset jack cover.

    Editar

  5. Samsung SGH-X495 Microphone Replacement: paso 4, imagen 1 de 2 Samsung SGH-X495 Microphone Replacement: paso 4, imagen 2 de 2

    • Begin by inserting the pry tool near the charger jack.

    • There are 4 tabs to release.

    • Start at the bottom and slide the tool up, lifting the silver front of the phone away from the white backing.

    • Loosen the 2 side tabs before moving on to the top two.

    • See the second photo to see location of the tabs.

    • Be careful of the ribbon wires shown in second photo.

    Editar

  6. Samsung SGH-X495 Microphone Replacement: paso 5, imagen 1 de 2 Samsung SGH-X495 Microphone Replacement: paso 5, imagen 2 de 2

    • Once the two side tabs are free; gently pry the white backing down to release the top two tabs.

    • Hold the phone with the left hand as shown

    • Wiggle the white backplate from side to side while pulling down with the right hand.

    • Be careful of the ribbon wires shown in second photo.

    Editar

  7. Samsung SGH-X495 Microphone Replacement, Motherboard: paso 6, imagen 1 de 1

    • Remove the ribbon wires connecting to the screen using the pry tool.

    Editar

  8. Samsung SGH-X495 Microphone Replacement: paso 7, imagen 1 de 1

    • 2 tabs hold the motherboard in place.

    • Release the labeled tabs with the pry tool from the location shown.

    Editar

  9. Samsung SGH-X495 Microphone Replacement: paso 8, imagen 1 de 1

    • Separate the motherboard from the phone.

    Editar

  10. Samsung SGH-X495 Microphone Replacement, Microphone: paso 9, imagen 1 de 1

    • Solder joints are accessable to replace the microphone.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Matthew Hove

Miembro Desde 01/05/11

1,031 Reputación

10 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team 3-40, Regan Winter 2011 Miembro de Cal Poly, Team 3-40, Regan Winter 2011

CPSU-REGAN-W11S3G40

4 Miembros

20 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 1,806