Partes

No se requieren partes.

  1. Remove the 4 (4.7mm) philips head screws.
    • Remove the 4 (4.7mm) philips head screws.

  2. Unplug the rubber charger outlet cover.
    • Unplug the rubber charger outlet cover.

  3. Unplug the rubber headset jack cover.
    • Unplug the rubber headset jack cover.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Begin by inserting the pry tool near the charger jack. There are 4 tabs to release.
    • Begin by inserting the pry tool near the charger jack.

    • There are 4 tabs to release.

    • Start at the bottom and slide the tool up, lifting the silver front of the phone away from the white backing.

    • Loosen the 2 side tabs before moving on to the top two.

    • See the second photo to see location of the tabs.

    • Be careful of the ribbon wires shown in second photo.

  6. Once the two side tabs are free; gently pry the white backing down to release the top two tabs. Hold the phone with the left hand as shown
    • Once the two side tabs are free; gently pry the white backing down to release the top two tabs.

    • Hold the phone with the left hand as shown

    • Wiggle the white backplate from side to side while pulling down with the right hand.

    • Be careful of the ribbon wires shown in second photo.

  7. Remove the ribbon wires connecting to the screen using the pry tool.
    • Remove the ribbon wires connecting to the screen using the pry tool.

  8. 2 tabs hold the motherboard in place.
    • 2 tabs hold the motherboard in place.

    • Release the labeled tabs with the pry tool from the location shown.

  9. Separate the motherboard from the phone.
    • Separate the motherboard from the phone.

  10. Solder connections can be accessed to replace head phone jack.
    • Solder connections can be accessed to replace head phone jack.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

Miembro Desde 05/01/11

1,031 Reputación

10 Guías creadas

Equipo

Cal Poly, Team 3-40, Regan Winter 2011 Miembro de Cal Poly, Team 3-40, Regan Winter 2011

CPSU-REGAN-W11S3G40

4 Miembros

20 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 1,592