Introducción

Use this guide to replace your Samsung SGH A707 phone's keypad.

Press on the markings on the cover and pull it down to reveal the battery.
  • Press on the markings on the cover and pull it down to reveal the battery.

Agregar Comentario

Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.
  • Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.

Agregar Comentario

  • Here is the phone without the battery.

Agregar Comentario

  • Unscrew the six screws on the back of the phone using the Phillips #0 screw driver.

Agregar Comentario

  • Use the prying tool the pry off the phone's plastic frame.

Agregar Comentario

  • Use the prying tool to disconnect the rectangular connector.

Agregar Comentario

  • Use the prying tool to disconnect the small connector.

Agregar Comentario

  • Gently pull off the circuit board.

Agregar Comentario

  • Here is the phone without the logic board.

Agregar Comentario

  • Hold the phone and gently separate the circuit board that holds the dome switches and the front face of the phone, revealing the rubber keyboard.

Agregar Comentario

  • Here is the phone without the dome switch circuit board.

Agregar Comentario

  • Here is the phone and the rubber keyboard.

Agregar Comentario

  • Here is the rubber keyboard and the dome switch circuit board. A quick inspection of these elements can reveal keypad malfunctions. Look for dirt or debris that do not belong there.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

yfm

Miembro Desde 06/11/12

10 Reputación

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 449