Saltar al contenido principal

Samsung SCV-VLUUST50 Flash Capacitor Replacement

Qué necesitas

  1. Samsung SCV-VLUUST50 Flash Capacitor Replacement, Cover: paso 1, imagen 1 de 3 Samsung SCV-VLUUST50 Flash Capacitor Replacement, Cover: paso 1, imagen 2 de 3 Samsung SCV-VLUUST50 Flash Capacitor Replacement, Cover: paso 1, imagen 3 de 3
    • Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

    • Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

  2. Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 2, imagen 1 de 3 Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 2, imagen 2 de 3 Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 2, imagen 3 de 3
    • Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

    • Remove the corner panel by applying pressure away from the shutter button.

    • The memory card cover will come off with the corner panel.

    • Remove the top panel by applying gentle pressure away from the shutter button.

  3. Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 3, imagen 1 de 1
    • Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

  4. Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 4, imagen 1 de 2 Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 4, imagen 2 de 2
    • Remove the front and back covers by pulling them straight apart.

  5. Samsung SCV-VLUUST50 Flash Capacitor Replacement, Flash Capacitor: paso 5, imagen 1 de 2 Samsung SCV-VLUUST50 Flash Capacitor Replacement, Flash Capacitor: paso 5, imagen 2 de 2
    • Remove the screw securing the shutter button.

    • Lift the shutter button to remove it.

  6. Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 6, imagen 1 de 2 Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 6, imagen 2 de 2
    • Remove the 3 visible screws with a Phillips #000 Driver

    • Move the circuitry and wires out of the way to expose another screw, and remove it with the same driver.

  7. Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 7, imagen 1 de 3 Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 7, imagen 2 de 3 Samsung SCV-VLUUST50 Flash Capacitor Replacement: paso 7, imagen 3 de 3
    • Pull the flash capacitor out of its compartment to expose the wires connected to it.

    • Cut the connecting wires with wire cutters.

    • Solder the wires to the new power source with a soldering iron and electrical solder.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 154