Repara tus cosas Comunidad Tienda

Samsung SCV-VLUUST50 Flash Bulb Replacement

Introducción

The replacement of this flash light bulb will be needed when flash mode isn't working.

Qué necesitas

  1. Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: paso 1, imagen 1 de 3 Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: paso 1, imagen 2 de 3 Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: paso 1, imagen 3 de 3

    • Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

    • Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

    Editar

  2. Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 2, imagen 1 de 3 Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 2, imagen 2 de 3 Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 2, imagen 3 de 3

    • Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

    • Remove the corner panel by applying pressure away from the shutter button.

    • The memory card cover will come off with the corner panel.

    • Remove the top panel by applying gentle pressure away from the shutter button.

    Editar

  3. Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 3, imagen 1 de 1

    • Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

    Editar

  5. Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 4, imagen 1 de 2 Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 4, imagen 2 de 2

    • Remove the front and back covers by pulling them straight apart.

    Editar

  6. Samsung SCV-VLUUST50 Flash Bulb Replacement, Flash Bulb: paso 5, imagen 1 de 2 Samsung SCV-VLUUST50 Flash Bulb Replacement, Flash Bulb: paso 5, imagen 2 de 2

    • Remove the screw securing the shutter button to the camera frame.

    • Lift the shutter button to remove it.

    Editar

  7. Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 6, imagen 1 de 2 Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 6, imagen 2 de 2

    • Remove the screws from the circuitry with a Phillips #000 driver.

    • Remove the screw connecting the flash housing to the camera frame with the same driver.

    Editar

  8. Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 7, imagen 1 de 2 Samsung SCV-VLUUST50 Flash Bulb Replacement: paso 7, imagen 2 de 2

    • Pull the flash housing away from the camera frame.

    • Cut the wires connecting the flash module to the circuitry.

    • Connect the new flash module to the circuitry with a soldering iron and electrical solder.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 135