Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Samsung SCH-U340 Top Casing Replacement

Introducción

This guide will cover the removal of the Samsung SCH-U340 top casing.

Qué necesitas

  1. Samsung SCH-U340 Top Casing Replacement, Battery: paso 1, imagen 1 de 1

    • Turn the cell phone so that the back side is facing you.

    • Press the upper indent and slide the back cover down.

    Traducir

  2. Samsung SCH-U340 Top Casing Replacement: paso 2, imagen 1 de 1

    • Pull the battery up from indent at the bottom and slide it out.

    Traducir

  3. Samsung SCH-U340 Top Casing Replacement: paso 3, imagen 1 de 1

    • Set the battery aside.

    Traducir

  5. Samsung SCH-U340 Top Casing Replacement, Top Casing: paso 4, imagen 1 de 1

    • The outer casing consists of two separate parts on the upper and lower halves of the device. The upper outer casing is held on through a combination of screws and tabs. First remove the plastic plugs covering the screws with a spudger.

    Traducir

  6. Samsung SCH-U340 Top Casing Replacement: paso 5, imagen 1 de 1

    • Underneath the plugs are two small screws that can be removed with a small Phillips screwdriver. They will need to be pried out after unscrewing them due to their size. Take care not to lose the screws as they are small and have a tendency to roll.

    Traducir

  7. Samsung SCH-U340 Top Casing Replacement: paso 6, imagen 1 de 1

    • The outer cover is now secured with seven tabs: one large tab (marked in red) and seven smaller tabs (marked in orange).

    • To begin removing the outer cover start by prying the large tab up with a flat object.

    Traducir

  8. Samsung SCH-U340 Top Casing Replacement: paso 7, imagen 1 de 1

    • Continue to pry each tab up, taking care not to break the tabs.

    • If disaster strikes and a tab is broken, the outer casing can still be put back on assuming the majority of the tabs are still intact.

    Traducir

  9. Samsung SCH-U340 Top Casing Replacement: paso 8, imagen 1 de 1

    • After the last tab is removed, tug gently on the outer casing to remove it. Don't pull too hard, or you may damage the wires connected to the speaker.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 11 otros colaboradores

Anish Sambamurthy

Miembro Desde 02/11/10

31 Reputación

2 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

Cal Poly, Team 3-21, Maness Winter 2010 Miembro de Cal Poly, Team 3-21, Maness Winter 2010

CPSU-MANESS-W10S3G21

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 4

Todo El Tiempo: 2,778