Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the cell phone so that the back side is facing you.
-
Press the upper indent and slide the back cover down.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the battery up from indent at the bottom and slide it out.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The lower casing is held on by four screws in the corner of the battery enclosure. Remove these screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a spudger to pry the back assembly off of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
On the bottom casing, there should be a single metal screw holding the antennae in. Remove this screw.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry the antennae off by inserting a flat object such as a spudgel into the slot marked in yellow and pushing upwards.
-