Repara tus cosas Comunidad Tienda

Samsung SC MX-20 Lens Replacement

Introducción

The lens of a camcorder is one of the most important components of the device. However, the lens is also susceptible to cracking and becoming dirty. A dirty/cracked lens may affect the outcome of the photographed results, so a replacement may be in order.

When the lens of a Samsung camcorder are damaged or non-functional, it would need to be replaced. This guide will show you how to remove the lens in your camcorder.

Qué necesitas

  1. Samsung SC MX-20 Lens Replacement, Lens: paso 1, imagen 1 de 3 Samsung SC MX-20 Lens Replacement, Lens: paso 1, imagen 2 de 3 Samsung SC MX-20 Lens Replacement, Lens: paso 1, imagen 3 de 3

    • Unscrew the eight 4mm screws using the Phillips #000 screwdriver.

    Traducir

  2. Samsung SC MX-20 Lens Replacement: paso 2, imagen 1 de 3 Samsung SC MX-20 Lens Replacement: paso 2, imagen 2 de 3 Samsung SC MX-20 Lens Replacement: paso 2, imagen 3 de 3

    • Unplug the cord connecting the LCD section of the device.

    • Remove the left face of the device.

    • Remove the top face by removing the three 4mm screws using a Phillips #000 screwdriver.

    Traducir

  4. Samsung SC MX-20 Lens Replacement: paso 3, imagen 1 de 3 Samsung SC MX-20 Lens Replacement: paso 3, imagen 2 de 3 Samsung SC MX-20 Lens Replacement: paso 3, imagen 3 de 3

    • After removing the body of the device, unscrew the two 3.5mm Phillips #000 screws holding the battery compartment in place.

    • Remove the battery compartment.

    Traducir

  5. Samsung SC MX-20 Lens Replacement: paso 4, imagen 1 de 3 Samsung SC MX-20 Lens Replacement: paso 4, imagen 2 de 3 Samsung SC MX-20 Lens Replacement: paso 4, imagen 3 de 3

    • Remove the lens assembly from the device.

    Traducir

  6. Samsung SC MX-20 Lens Replacement: paso 5, imagen 1 de 3 Samsung SC MX-20 Lens Replacement: paso 5, imagen 2 de 3 Samsung SC MX-20 Lens Replacement: paso 5, imagen 3 de 3

    • Remove the three 3.5mm Phillips #000 screws on the metal part from the lens component.

    • Remove the motherboard from the lens.

    • Remove the lens from the lens assembly.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 16

Todo El Tiempo: 177