Repara tus cosas Comunidad Tienda

Samsung SC MX-20 Hand Strap Replacement

Introducción

When you use your camcorder to record video, you’ll find that the hand strap is one of the most useful components to stabilize your image/video. The hand strap in your device is likely to wear out and become unusable. If you’re looking to replace a worn out or damaged hand strap, follow the steps in this guide.

Qué necesitas

  1. Samsung SC MX-20 Hand Strap Replacement, Hand Strap: paso 1, imagen 1 de 3 Samsung SC MX-20 Hand Strap Replacement, Hand Strap: paso 1, imagen 2 de 3 Samsung SC MX-20 Hand Strap Replacement, Hand Strap: paso 1, imagen 3 de 3

    • Remove all eight screws using the Phillips #000 screwdriver.

    Editar

  2. Samsung SC MX-20 Hand Strap Replacement: paso 2, imagen 1 de 1

    • Pull apart the sides of the camera once the screws are removed.

    Editar

  4. Samsung SC MX-20 Hand Strap Replacement: paso 3, imagen 1 de 1

    • Remove the three screws using the Phillips #000 screwdriver.

    Editar

  5. Samsung SC MX-20 Hand Strap Replacement: paso 4, imagen 1 de 1

    • Remove the three screws using the Phillips #000 screwdriver.

    Editar

  6. Samsung SC MX-20 Hand Strap Replacement: paso 5, imagen 1 de 1

    • Remove the four screws using a Phillips #000 screwdriver.

    Editar

  7. Samsung SC MX-20 Hand Strap Replacement: paso 6, imagen 1 de 2 Samsung SC MX-20 Hand Strap Replacement: paso 6, imagen 2 de 2

    • Remove the hand strap from the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 172