Introducción

You will take the camera apart in order to replace the damaged LCD screen and restore functionality.

Partes

No se requieren partes.

  1. Remove all screws along the edges of the camera, using a #00 Phillips screwdriver.
    • Remove all screws along the edges of the camera, using a #00 Phillips screwdriver.

    Agregar Comentario

  2. Slide open the battery  compartment cover before removing the exterior covers of the camera.
    • Slide open the battery compartment cover before removing the exterior covers of the camera.

    Agregar Comentario

    • Carefully pull the back case (the side showing the LCD screen) away from the front half.

    • There are clips securing the top of the back case. Do not be afraid to use the proper amount of force to remove the back case.

    • Turn the camera around to the front (the lens side). Carefully remove the front case.

    • There are also clips on the lens' side as well, so do not be afraid to use force.

    Agregar Comentario

    • Position the camera so the LCD screen is facing you.

    • Remove the LCD screen from the screen plate.

    • Replace the broken LCD screen with the functioning LCD screen.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Equipo

Cal Poly, Team 33-72, Johann Spring 2010 Miembro de Cal Poly, Team 33-72, Johann Spring 2010

CPSU-JOHANN-S10S33G72

4 Miembros

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 4

Todo El Tiempo: 8,210