Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

RAM replacement may need to be done when computer gets slow or RAM is damaged. Also upgrading RAM requires this guide as well. This guide will display steps to replace RAM.

Partes

No se especificaron partes.

  1. Place the laptop upside down.
    • Place the laptop upside down.

  2. Locate two notches above the battery. Slide both battery locking notches to either side to remove the battery.
    • Locate two notches above the battery.

    • Slide both battery locking notches to either side to remove the battery.

    • Pull the battery out.

  3. Using the Phillips #0 screwdriver, unscrew the one 5mm screw. Using the blue plastic opening tools, wedge one in between the back panel and the laptop. Carefully remove the back panel..
    • Using the Phillips #0 screwdriver, unscrew the one 5mm screw.

    • Using the blue plastic opening tools, wedge one in between the back panel and the laptop.

    • Carefully remove the back panel..

  4. Slide the hinges outwards to release the RAM.
    • Slide the hinges outwards to release the RAM.

    • RAM will pop up by itself. If not, lift the RAM up to about 45 degrees.

  5. Carefully slide the RAM away from the slot to remove it. Repeat step 4 to remove another RAM.
    • Carefully slide the RAM away from the slot to remove it.

    • Repeat step 4 to remove another RAM.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Juri Ando

Miembro Desde 15/09/16

896 Reputación

8 Guías creadas

Equipo

USF Tampa, Team 18-2, Blackwell Fall 2016 Miembro de USF Tampa, Team 18-2, Blackwell Fall 2016

USFT-BLACKWELL-F16S18G2

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 297