Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Optic drive replacement may need to be done when the drive is damaged.

Partes

No se especificaron partes.

  1. Place the laptop upside down.
    • Place the laptop upside down.

  2. Locate two notches above the battery. Slide both battery locking notches to either side to remove the battery.
    • Locate two notches above the battery.

    • Slide both battery locking notches to either side to remove the battery.

    • Pull the battery out.

  3. Using the Phillips #0 screwdriver, unscrew the one 5mm screw. Using the blue plastic opening tools, wedge one in between the back panel and the laptop. Carefully remove the back panel..
    • Using the Phillips #0 screwdriver, unscrew the one 5mm screw.

    • Using the blue plastic opening tools, wedge one in between the back panel and the laptop.

    • Carefully remove the back panel..

  4. Remove the 4mm Phillips #0 screw using a Phillips #0 screwdriver.
    • Remove the 4mm Phillips #0 screw using a Phillips #0 screwdriver.

  5. Use the spudger or fingers to  gently pull the optical drive out. Slide the optic drive away from the laptop. Slide the optic drive away from the laptop.
    • Use the spudger or fingers to gently pull the optical drive out.

    • Slide the optic drive away from the laptop.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Juri Ando

Miembro Desde 15/09/16

896 Reputación

8 Guías creadas

Equipo

USF Tampa, Team 18-2, Blackwell Fall 2016 Miembro de USF Tampa, Team 18-2, Blackwell Fall 2016

USFT-BLACKWELL-F16S18G2

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 217