Saltar al contenido principal

Samsung Powerbot R9250 Wheel Replacement

Qué necesitas

  1. Samsung Powerbot R9250 Wheel Replacement, Wheel: paso 1, imagen 1 de 1
    • Flip the bot onto its side with the wheel you want to remove on top.

  2. Samsung Powerbot R9250 Wheel Replacement: paso 2, imagen 1 de 1
    • Remove the round white cap on the outside of the wheel.

  3. Samsung Powerbot R9250 Wheel Replacement: paso 3, imagen 1 de 1
    • Next, pry and remove the white casing that runs around the back round part of the bot.

  4. Samsung Powerbot R9250 Wheel Replacement: paso 4, imagen 1 de 1
    • Continue until the whole white casing comes off.

  5. Samsung Powerbot R9250 Wheel Replacement: paso 5, imagen 1 de 1
    • For the wheel you want to remove, there is a small square opening on outer black protective layer still around the wheel. Locate the screw that is inside the whole. Remove this screw.

  6. Samsung Powerbot R9250 Wheel Replacement: paso 6, imagen 1 de 2 Samsung Powerbot R9250 Wheel Replacement: paso 6, imagen 2 de 2
    • Pry the black protective layer away from the wheel, and pull the wheel out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ethen Sanchez

Miembro Desde 01/24/17

552 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 10-3, Banghart Winter 2017 Miembro de Cal Poly, Team 10-3, Banghart Winter 2017

CPSU-BANGHART-W17S10G3

3 Miembros

10 Guías creadas

Un comentario

Hi Ethen. I've recently replaced both wheel kits on the same model powerbot you are working on in this guide. When I turn it on now it becomes absolutely possessed. Goes much faster than normal and moved erratically. I am wondering if you have ever experienced this or have heard of this.

Cameron Curran - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 2,853