Repara tus cosas Comunidad Tienda

Samsung PL200 Motherboard Replacement

Introducción

In this guide you will take the following steps to replace the motherboard in the Samsung PL200.

Qué necesitas

  1. Samsung PL200 Motherboard Replacement, Motherboard: paso 1, imagen 1 de 2 Samsung PL200 Motherboard Replacement, Motherboard: paso 1, imagen 2 de 2

    • Remove the two 3mm black external scews from he camera's side using the #000 Philips Screwdriver.

    • Remove the five 3mm silver external screws from the camera's side and bottom using the #000 Philips Screwdriver

    Editar

  2. Samsung PL200 Motherboard Replacement: paso 2, imagen 1 de 3 Samsung PL200 Motherboard Replacement: paso 2, imagen 2 de 3 Samsung PL200 Motherboard Replacement: paso 2, imagen 3 de 3

    • Use the Plastic Opening Tool and your finger to pry off and remove the external cover.

    Editar

  3. Samsung PL200 Motherboard Replacement: paso 3, imagen 1 de 3 Samsung PL200 Motherboard Replacement: paso 3, imagen 2 de 3 Samsung PL200 Motherboard Replacement: paso 3, imagen 3 de 3

    • Remove the 3mm screw holding the circuit board using the #000 Philips Screwdriver.

    • Remove any tape on the circuit board and screen.

    • Using Tweezers, unplug the wires from the circuit board and remove it.

    Editar

  4. Samsung PL200 Motherboard Replacement: paso 4, imagen 1 de 2 Samsung PL200 Motherboard Replacement: paso 4, imagen 2 de 2

    • Flip the LCD screen forward and remove the two 3mm screws beneath it using the #000 Phillips Screwdriver.

    • Remove the metal brace using the Plastic Opening Tool.

    Editar

  5. Samsung PL200 Motherboard Replacement: paso 5, imagen 1 de 2 Samsung PL200 Motherboard Replacement: paso 5, imagen 2 de 2

    • Lift the black latch where the screen plugs into the motherboard and pull the cord to remove the screen

    • Separate the screen and the metal brace from the camera body.

    Editar

  7. Samsung PL200 Motherboard Replacement: paso 6, imagen 1 de 1

    • Remove the front cover of the camera using your fingers and the Plastic Opening Tool.

    Editar

  8. Samsung PL200 Motherboard Replacement: paso 7, imagen 1 de 1

    • Set the screen and metal brace aside

    • Open the camera's battery cover.

    Editar

  9. Samsung PL200 Motherboard Replacement: paso 8, imagen 1 de 1

    • Using the #000 Phillips Screwdriver, remove the two 3mm screws holding the motherboard in place.

    • There may be tape still on the motherboard, if so, remove it.

    Editar

  10. Samsung PL200 Motherboard Replacement: paso 9, imagen 1 de 3 Samsung PL200 Motherboard Replacement: paso 9, imagen 2 de 3 Samsung PL200 Motherboard Replacement: paso 9, imagen 3 de 3

    • Use the Tweezers to remove the tape from bottom of the camera

    • Use the Tweezers to disconnect the lens unit cord that is at the bottom of the camera from the motherboard.

    • Remove the last 3mm screw that holds the motherboard in place.

    Editar

  11. Samsung PL200 Motherboard Replacement: paso 10, imagen 1 de 3 Samsung PL200 Motherboard Replacement: paso 10, imagen 2 de 3 Samsung PL200 Motherboard Replacement: paso 10, imagen 3 de 3

    • Use the Tweezers to unplug the small lens unit cord from the camera frame on the back side of the camera.

    • Gently lift the lens unit from the frame.

    • Separate the lens unit, motherboard, and camera.

    Editar

  12. Samsung PL200 Motherboard Replacement: paso 11, imagen 1 de 3 Samsung PL200 Motherboard Replacement: paso 11, imagen 2 de 3 Samsung PL200 Motherboard Replacement: paso 11, imagen 3 de 3

    • Use the Tweezers to remove the small cord from motherboard.

    • Use the Tweezers to remove the first large lens unit cord from the motherboard.

    • Use the Tweezers to remove the second large lens unit cord from the motherboard.

    Editar

  13. Samsung PL200 Motherboard Replacement: paso 12, imagen 1 de 2 Samsung PL200 Motherboard Replacement: paso 12, imagen 2 de 2

    • Desolder the four wires from the old motherboard.

    Editar

  14. Samsung PL200 Motherboard Replacement: paso 13, imagen 1 de 2 Samsung PL200 Motherboard Replacement: paso 13, imagen 2 de 2

    • Last, solder on a functional motherboard at this stage and reassemble the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Marcus Lee

Miembro Desde 01/29/15

101 Reputación

1 Guía escrita

Insignias: 2

Equipo

Clemson, Team 15-7, Shirley Winter 2015 Miembro de Clemson, Team 15-7, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G7

5 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 472