Introducción

If your hard drive is bad, or you need a larger hard drive, this guide will show you how to replace your hard drive.

Partes

No se requieren partes.

  1. Lay the laptop down so that the bottom is facing up.
    • Lay the laptop down so that the bottom is facing up.

    • There is no battery in the picture.

  2. Slide the two plastic tabs to the opposing sides.
    • Slide the two plastic tabs to the opposing sides.

    • There is no battery in the picture.

  3. While both are in the unlocked position, slide the battery out.
    • While both are in the unlocked position, slide the battery out.

    • There is no battery in the picture.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Remove the M2.5x5 mm screw with a Phillips #0 screwdriver.
    • Remove the M2.5x5 mm screw with a Phillips #0 screwdriver.

  6. Slide the cover 1/4" towards the front of the laptop.
    • Slide the cover 1/4" towards the front of the laptop.

  7. Then, lift the cover off.
    • Then, lift the cover off.

  8. Slide the  hard drive  1/4" towards the front of the laptop.
    • Slide the hard drive 1/4" towards the front of the laptop.

  9. Then, lift the drive up and out.
    • Then, lift the drive up and out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 62