Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Samsung NP-R540-JA09US Front Panel Replacement

Qué necesitas

  1. Samsung NP-R540-JA09US Front Panel Replacement, Battery: paso 1, imagen 1 de 1
    • Turn off laptop before starting.

    • Remove power cable before starting.

    • Flip the laptop over so that the bottom of the laptop is facing upwards.

  2. Samsung NP-R540-JA09US Front Panel Replacement: paso 2, imagen 1 de 1
    • Pull the two latches outward.

  3. Samsung NP-R540-JA09US Front Panel Replacement: paso 3, imagen 1 de 2 Samsung NP-R540-JA09US Front Panel Replacement: paso 3, imagen 2 de 2
    • Slide the battery out of the laptop.

  4. Samsung NP-R540-JA09US Front Panel Replacement, Optical Drive: paso 4, imagen 1 de 1
    • Remove securing screw with the PH0 head.

  5. Samsung NP-R540-JA09US Front Panel Replacement: paso 5, imagen 1 de 1
    • Slide the optical drive out and remove it from the device.

  6. Samsung NP-R540-JA09US Front Panel Replacement, Keyboard: paso 6, imagen 1 de 1
    • Remove the two Phillips #0 screws labeled KBD.

    • There are 5 clips along the top of the keyboard. Insert a thin opener tool (iSessamo tool or similar) between each clip and the keyboard tray to release it.

    • Make sure to pry the metal keyboard base and not the keycaps.

  7. Samsung NP-R540-JA09US Front Panel Replacement: paso 8, imagen 1 de 1
    • Do not bend your keyboard as shown in this picture.

    • Lift the keyboard up to release catches on the sides, then slide the keyboard towards the screen to slide tabs out of the slots at the bottom.

  8. Samsung NP-R540-JA09US Front Panel Replacement: paso 9, imagen 1 de 2 Samsung NP-R540-JA09US Front Panel Replacement: paso 9, imagen 2 de 2
    • Disconnect the keyboard cable from the motherboard.

  9. Samsung NP-R540-JA09US Front Panel Replacement, Front Panel: paso 10, imagen 1 de 1
    • Remove the two screws with a Phillips #00 screwdriver.

  10. Samsung NP-R540-JA09US Front Panel Replacement: paso 11, imagen 1 de 1
    • Remove the highlighted screws with a Phillips #0 Screwdriver.

  11. Samsung NP-R540-JA09US Front Panel Replacement: paso 12, imagen 1 de 3 Samsung NP-R540-JA09US Front Panel Replacement: paso 12, imagen 2 de 3 Samsung NP-R540-JA09US Front Panel Replacement: paso 12, imagen 3 de 3
    • Pry the front panel away from the base with an Opening Tool.

  12. Samsung NP-R540-JA09US Front Panel Replacement: paso 13, imagen 1 de 2 Samsung NP-R540-JA09US Front Panel Replacement: paso 13, imagen 2 de 2
    • Disconnect the speaker wire from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 16

Todo El Tiempo: 452