Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Partes

No se especificaron partes.

  1. Power off laptop before starting.
    • Power off laptop before starting.

    • Find the back plate cover labeled HDD.

  2. Remove both of the 5 mm Phillips head screws on the HDD back plate cover. Remove both of the 5 mm Phillips head screws on the HDD back plate cover.
    • Remove both of the 5 mm Phillips head screws on the HDD back plate cover.

  3. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward.
    • Pull down while applying pressure to release HDD back plate cover and then lift the cover upward.

  4. Find the black plastic tab on the hard drive.
    • Find the black plastic tab on the hard drive.

  5. Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free. Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free.
    • Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Brian Adamson

Miembro Desde 10/10/16

529 Reputación

3 Guías creadas

Equipo

Texas Tech, Team 6-2, Bennett Fall 2016 Miembro de Texas Tech, Team 6-2, Bennett Fall 2016

TTU-BENNETT-F16S6G2

4 Miembros

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 13

Todo El Tiempo: 1,191