Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
To remove the phone's back cover, slide your fingernail into the slit at the bottom of your phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place your finger on either bottom corner of the battery slot and lift to remove the battery.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a Phillips #00 Screwdriver, remove the six 5 mm screws from the back casing of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the iFixit Opening Tool, insert the tool into the seam between the back case and the rest of the phone.
-
Working along the seam, pry the back casing from the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the camera by using the iFixit Tool to pry the camera cable from the motherboard.
-
Carefully remove the camera from the phone's motherboard.
-