Repara tus cosas Comunidad Tienda

Samsung Jack Rear Case Replacement

Introducción

Use this guide to install a rear case.

Qué necesitas

  1. Samsung Jack Rear Case Replacement, Battery: paso 1, imagen 1 de 1

    • Slide the battery cover downwards with pressure focused on the center of the cover.

    • Lift the cover off of the phone.

    Editar

  2. Samsung Jack Rear Case Replacement: paso 2, imagen 1 de 1

    • Grasp the bottom left and right corners of the battery and lift it from its housing.

    Editar

  4. Samsung Jack Rear Case Replacement, Rear Case: paso 3, imagen 1 de 1

    • Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.

    Editar

  5. Samsung Jack Rear Case Replacement: paso 4, imagen 1 de 3 Samsung Jack Rear Case Replacement: paso 4, imagen 2 de 3 Samsung Jack Rear Case Replacement: paso 4, imagen 3 de 3

    • The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.

    • Insert the Plastic Opening Tool in between the front and rear cases.

    • Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.

    Editar

  6. Samsung Jack Rear Case Replacement: paso 5, imagen 1 de 1

    • Lift the rear case off of the phone.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 6 otros colaboradores

Paul Piller

Miembro Desde 04/12/11

56 Reputación

5 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 24-57, Amido Spring 2011 Miembro de Cal Poly, Team 24-57, Amido Spring 2011

CPSU-AMIDO-S11S24G57

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 1,137