Partes

No se requieren partes.

  1. Apply pressure to the back cover and slide it forward towards the camera.
    • Apply pressure to the back cover and slide it forward towards the camera.

    • Lift the back cover off the phone.

  2. Holding the phone firmly, use the notches to grip and lift up the battery.
    • Holding the phone firmly, use the notches to grip and lift up the battery.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the four 4.45mm screws at the corners of the phone.
    • Remove the four 4.45mm screws at the corners of the phone.

  5. Use the plastic opening tool to unhinge the locks around the edges of the phone. Do not worry about the inner components of the phone; they are not connected to this case.
    • Use the plastic opening tool to unhinge the locks around the edges of the phone.

    • Do not worry about the inner components of the phone; they are not connected to this case.

  6. Lift the casing off of the phone.
    • Lift the casing off of the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jacob Michener

Miembro Desde 10/10/11

31 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 3-13, Regan Fall 2011 Miembro de Cal Poly, Team 3-13, Regan Fall 2011

CPSU-REGAN-F11S3G13

4 Miembros

16 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 785