Introducción

This guide shows how to take out the antenna so that a replacement can be installed.

Partes

No se requieren partes.

  1. Apply pressure to the back cover and slide it forward towards the camera.
    • Apply pressure to the back cover and slide it forward towards the camera.

    • Lift the back cover off the phone.

    Agregar Comentario

  2. Holding the phone firmly, use the notches to grip and lift up the battery.
    • Holding the phone firmly, use the notches to grip and lift up the battery.

    Agregar Comentario

    • Remove the four 4.45mm screws at the corners of the phone.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Use the plastic opening tool to unhinge the locks around the edges of the phone.

    • Do not worry about the inner components of the phone; they are not connected to this case.

    Agregar Comentario

    • Lift the casing off of the phone.

    Agregar Comentario

    • With the screws removed, locate the antenna.

    Agregar Comentario

    • Using a Phillips head screwdriver, remove the 4.50mm screw holding the antenna in place.

    Agregar Comentario

    • Using the plastic opener tool, squeeze gently on the antenna cable connector and lift to remove the connector from its position.

    Agregar Comentario

    • Gently lift up on the antenna and remove it from the back of the device.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jimmy Kuo

Miembro Desde 10/10/11

14 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 3-13, Regan Fall 2011 Miembro de Cal Poly, Team 3-13, Regan Fall 2011

CPSU-REGAN-F11S3G13

4 Miembros

16 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 966