Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Samsung Impression Keyboard Replacement

Qué necesitas

  1. Samsung Impression Keyboard Replacement, Battery: paso 1, imagen 1 de 1
    • Orient the phone with the screen facing down.

    • Using your thumb, slide the back panel away from the camera to expose the battery.

  2. Samsung Impression Keyboard Replacement: paso 2, imagen 1 de 2 Samsung Impression Keyboard Replacement: paso 2, imagen 2 de 2
    • Insert the tip of the spudger on the left side of the battery, opposite the direction of the white arrow.

    • Pry the battery free. It will pivot in the direction of the white arrow.

  3. Samsung Impression Keyboard Replacement, Back Cover: paso 3, imagen 1 de 1
    • Remove the six 3.5 mm screws using a Phillips #000 screwdriver. Make sure to unscrew in a counterclockwise direction.

  4. Samsung Impression Keyboard Replacement: paso 4, imagen 1 de 1
    • Remove the back cover by gently prying around the top and bottom edges with the spudger.

    • It may help to slide the touchscreen upwards when removing the back panel.

    • The side buttons will become loose and will fall out, so put these in a safe place.

  5. Samsung Impression Keyboard Replacement, Circuit Board: paso 5, imagen 1 de 1
    • To free the circuit board, remove the black wire that is holding it down.

    • You can remove the wire by gently prying up the gold terminator that is attached to the green circuit board. A gentle tug is all it should take.

  6. Samsung Impression Keyboard Replacement: paso 6, imagen 1 de 2 Samsung Impression Keyboard Replacement: paso 6, imagen 2 de 2
    • The circuit board will still be held on by a blue and black ribbon. Remove the entire circuit board by gently tugging the ribbon upwards.

  7. Samsung Impression Keyboard Replacement, Antenna: paso 7, imagen 1 de 2 Samsung Impression Keyboard Replacement, Antenna: paso 7, imagen 2 de 2
    • Remove the 3.9mm screw holding the bottom black piece (antenna assembly) into place.

    • The antenna assembly will snap off.

  8. Samsung Impression Keyboard Replacement, Keyboard: paso 8, imagen 1 de 1
    • Remove the two base screws along the edge of the silver piece, where you just removed the black end piece.

    • The screws are 2.7mm in length.

    • The bottom black end cap will snap out.

  9. Samsung Impression Keyboard Replacement: paso 9, imagen 1 de 2 Samsung Impression Keyboard Replacement: paso 9, imagen 2 de 2
    • Remove 6 screws holding the silver plate on.

    • 2.7mm in length

    • The keys will peel right out of the screen side of the phone.

  10. Samsung Impression Keyboard Replacement: paso 10, imagen 1 de 1
    • The silver piece you are left with is the physical keyboard assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ross McKelvie

Miembro Desde 04/18/11

196 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 8-10, Regan Spring 2011 Miembro de Cal Poly, Team 8-10, Regan Spring 2011

CPSU-REGAN-S11S8G10

4 Miembros

22 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,348