Introducción

How to remove & replace the phone's back cover.

Partes

No se requieren partes.

  1. Orient the phone with the screen facing down.
    • Orient the phone with the screen facing down.

    • Using your thumb, slide the back panel away from the camera to expose the battery.

  2. Grip the battery on its sides, opposite the direction of the white arrow. Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.
    • Grip the battery on its sides, opposite the direction of the white arrow.

    • Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  4. Remove the 6 outer screws.
    • Remove the 6 outer screws.

      • The screws should be 3.5 mm in length.

    • Put the screws in a safe place as they are very small and easy to lose.

  5. Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.
    • Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.

      • It may help to slide the touchscreen upwards when removing the back panel.

    • The side buttons will become loose and are prone to fall out, so put these in a safe place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Saul Villatoro

Miembro Desde 25/04/11

255 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 8-10, Regan Spring 2011 Miembro de Cal Poly, Team 8-10, Regan Spring 2011

CPSU-REGAN-S11S8G10

4 Miembros

22 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,557