Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Samsung Impression Antenna Replacement

Introducción

How to remove & replace the phone's antenna.

Qué necesitas

  1. Samsung Impression Antenna Replacement, Battery: paso 1, imagen 1 de 1

    • Orient the phone with the screen facing down.

    • Using your thumb, slide the back panel away from the camera to expose the battery.

    Traducir

  2. Samsung Impression Antenna Replacement: paso 2, imagen 1 de 2 Samsung Impression Antenna Replacement: paso 2, imagen 2 de 2

    • Insert the tip of the spudger on the left side of the battery, opposite the direction of the white arrow.

    • Pry the battery free. It will pivot in the direction of the white arrow.

    Traducir

  3. Samsung Impression Antenna Replacement, Back Cover: paso 3, imagen 1 de 1

    • Remove the six 3.5 mm screws using a Phillips #000 screwdriver. Make sure to unscrew in a counterclockwise direction.

    Traducir

  5. Samsung Impression Antenna Replacement: paso 4, imagen 1 de 1

    • Remove the back cover by gently prying around the top and bottom edges with the spudger.

    • It may help to slide the touchscreen upwards when removing the back panel.

    • The side buttons will become loose and will fall out, so put these in a safe place.

    Traducir

  6. Samsung Impression Antenna Replacement, Circuit Board: paso 5, imagen 1 de 1

    • To free the circuit board, remove the black wire that is holding it down.

    • You can remove the wire by gently prying up the gold terminator that is attached to the green circuit board. A gentle tug is all it should take.

    Traducir

  7. Samsung Impression Antenna Replacement: paso 6, imagen 1 de 2 Samsung Impression Antenna Replacement: paso 6, imagen 2 de 2

    • The circuit board will still be held on by a blue and black ribbon. Remove the entire circuit board by gently tugging the ribbon upwards.

    Traducir

  8. Samsung Impression Antenna Replacement, Antenna: paso 7, imagen 1 de 2 Samsung Impression Antenna Replacement, Antenna: paso 7, imagen 2 de 2

    • Remove the 3.9mm screw holding the bottom black piece (antenna assembly) into place.

    • The antenna assembly will snap off.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 4 otros colaboradores

Saul Villatoro

Miembro Desde 04/25/11

255 Reputación

7 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team 8-10, Regan Spring 2011 Miembro de Cal Poly, Team 8-10, Regan Spring 2011

CPSU-REGAN-S11S8G10

4 Miembros

22 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 2,864